Pellt xylitol da na'urar yin tauna siffar sandar
Injin Yin Taunawa
1.Pellet Shape Chewing Gum Machine
2.Strip Siffar Chewing Gum Machine
| Babban sassa | Iyawa (kg/h) | Ƙarfi (kw) | Girma (mm) |
| Blender | 300 | 23.2 | 2500×860×1250 |
| Extruder | 300 | 15.2 | 1550×700×1300 |
| Injin mirgina irin kek | 300 | 4.1 | 2400×750×1200 |
| Injin gyare-gyare | 300 | 1.5 | 1000×780×1150 |
| Mai rabon alawa | 300 | 2.25 | 2080×1250×1420 |
A. ƙoƙon ƙoƙon ƙoƙon ƙonawa / samarwa
B. injunan suturar ƙugiya;
C. injunan tattara kayan cingam.
1. Mixer:
Danyen kayan da za'a gauraya su cikin kullu(kafin mahautsini, akwai injin dumama).
2. Layin samarwa:
Kullu da za a saka a cikin extruder, yana tafiya duk hanyar zama siriri da sirara har sai da ake bukata kauri, sa'an nan Buga ƙugiya cores & yankan a wani tsawon.
Ana saka ƙwanƙwasa ƙwanƙwasa mai ƙima a kan tiren katako kuma a aika zuwa wani daki na daban don tsufa.
A madadin haka, idan kun yi ƙugiya, kuna buƙatar canza ƙwanƙwasa ƙwanƙwasa & na'ura mai yankan zuwa mashin ƙwanƙwasa katako & injin yankan;ko a wasu kalmomi, duka Coating gum & Stick gum na iya raba layin samarwa iri ɗaya.
Iyawa: 100kg / h;200kg/h;300kg/h;400kg/h.
3. Dakin tsufa:
Ana buƙatar na'urar sanyaya iska da injin cire danshi a cikin wannan ɗakin don isa ga yanayin da ke ƙasa:
Zazzabi: 18-20 ℃
Danshi: 50-55%
4. Maki mai raba ƙoƙon ƙwanƙwasa:
Bayan tsufa, za a aika da lallausan ƙugiya masu ƙima a cikin Mai Rarraba don zama guda ɗaya kuma mai zaman kanta.
Wannan tsari shine don suturta muryoyin ƙugiya sannan a goge.
Don yin danko mai inganci, musamman danko mai kyauta, yayin rufewa, iska a cikin kowane kwanon rufi dole ne a sarrafa shi sosai a wasu zafin jiki, danshi da isasshen adadin iska.
Abvantbuwan amfãni daga na'urorin shafa ƙonawa:
1) Cikakkun kayan shafa mai kyau, sanya danko mai kyau bayyanar & inganci mai kyau;
2) Rufe lokaci ya rage, yana sa samar da ku ya fi dacewa;
3) Gum shafi harsashi kauri za a iya sauƙi sarrafawa;
4) Yin gumaka ya fi tsayi tsawon rayuwar rayuwa.
A matsayin zaɓi, al'adarmu da aka yi ta iska za a iya sanye take da tsarin sake amfani da zafi, wanda zai iya adana 90% na kuzari idan aka kwatanta da daidaitaccen ƙira na yanzu.
Wannan tsari shine don suturta muryoyin ƙugiya sannan a goge.
Don yin danko mai inganci, musamman danko mai kyauta, yayin rufewa, iska a cikin kowane kwanon rufi dole ne a sarrafa shi sosai a wasu zafin jiki, danshi da isasshen adadin iska.
Samfuran tattarawa
2) Na'urar tattara kayan taunar cingam
a) fakitin kwalba;blister, fakitin sanda, 4pcs;
b) fakitin kwali;
c) 4 inji mai kwakwalwa a kan kunsa;
d) 10pcs a cikin fakitin sanda kamar orbit danko;
e) 25pcs a cikin jakar jaka;
f) 2 -4 inji mai kwakwalwa a cikin fakitin matashin kai
g) guda da yawa a cikin kwali, da sauransu
Samfuran tattarawa:
Jadawalin tafiyar da aikin shafa cingam:
Jadawalin tafiyar da aikin shafa cingam:
Mu ƙware ne a injinan ƙwanƙwasa don shafa cingam & itacen ƙoƙon itace;
Hakanan ana samun sifofi daban-daban (bazooka, fusen, ball, birgima) na injunan kumfa.
